Two different utensil holders in warm metal tones. One with spoons, and one with a hairdryer
DIY, DOWNTIME DIYS, HACKS

DOWNTIME DIYS #2 [HACKS]: Painted Cutlery Holder(s)

I’M LATE OMIGOD. Sorry. Yesterday was my birthday and I was doing a whole lot of nothing. This week’s DOWNTIME DIY is pretty simple, but I discovered some cool effects with these techniques so here goes.

I bought these simple stainless steel cutlery holders from Kmart – one for cooking utensils, and one for my hairdryer which needed an easily accessible home. I like warm metal tones so I have a lot of golds, bronzes, coppers, etc around the house (actually an apartment but whatever). So because these were stainless steel, I decided a simple hack was to paint them. But it’s in the painting that I worked out some techniques to get interesting effects.

Two different utensil holders in warm metal tones. One with spoons, and one with a hairdryer


METHOD 1:

The first one I did was the hairdryer holder which is a soft gold now after some spray painting. Aside from the usual “spray in well ventilated area” – i.e. outside – I recommend a matt finish spray and one that is not too liquid in it’s consistency. I use JET brand spray paint at $4.99 a can. You will only likely use about a quarter of a can for this as it is fairly straight forward. I think I did about 1 and half coats for this.

So. I flipped the tin upside down (let’s be honest, it’s a metal tin with perforations) and put my hand inside to hold it up and sprayed from a fair distance away while rotating the tin. I recommend a light but consistent press on the nozzle, and anywhere from 30-50cm away. This gives a lighter coat and makes the paint look softer. WHO KNEW!

The second coat was a lot faster as I did a bare minimum overlay as I was already enjoying the colour. I left it outside to dry after each coat, and I feel that it was particularly windy, and the dust particles have blown through and around the tin because the colour looks even softer now. Almost powder coated! FREE POWDER COATING. Especially if you live next door to a stable yard like me.

Gold metal utensil holder with hairdryer
Yes, I shed a lot of hair. Sorry.

MATERIALS:

  • Stainless Steel metal object (doesn’t have to be a cutlery holder but definitely better to be stainless steel to avoid rust)
  • Spray paint (JET brand is great)
  • Newspaper/drop cloth/rag for setting down
  • Air and outdoor area for drying/spraying


METHOD 2:

Bronze/copper metal utensil holder with paint tube, palette, and paint covered square sponge
Woo! Getting outside! Fresh air!

OK, number two. This one is slightly more interesting perhaps? I have a copper/bronze theme in my kitchen (kinda) and wanted an interesting cutlery holder for my millions of coconut shell cooking spoons. For this one, I used acrylic paint and a tiny square of sponge that I had leftover from another painting project.

So. Put some paint into a palette or plate or on a piece of cardboard or whatever you use for mixing/decanting paint. I used a bronze acrylic paint by Reeves. Now this sponge square was from a dish scrubbing sponge that I cut up so it has a small rough side, and a larger soft side. We are using the SOFT SIDE. Trust me on this.

Use the sponge dry. DO NOT WET. Dab into paint and get a good amount on the sponge and start dabbing onto the tin. I placed the tin on a newspaper and angled it slightly, and rotated as needed. Don’t daub the paint on or drag the sponge. You want it splotchy.

Once the first layer is done, you can go back straight away and fill in any gaps and do a second layer. The paint would have dried a little on both the tin and the sponge (more importantly, the sponge), so you won’t take anything off. The interesting part is happening with the sponge. By drying, it has stiffened in place, so when you put on the second layer, there will be some definition in the pattern that is forming on the tin and because you’re dabbing, you will get parts with more paint than others. Finish layer, leave to dry.

You can leave it outside, and it should dry within an hour. When you go back it will have dried into a pattern that is rough to the touch, and depending on the paint you used (or if you mixed some colours), you could end up with something that looks a bit like a bronze age artefact! Kinda. I think it looks cool.

So try it out! Cut the sponge into whatever shape or size you want, combine the two methods I’ve described, or try different colours with different coats! Make cool things. Show me!

MATERIALS:

  • Stainless steel object (see above)
  • Acrylic Paint (I used Reeves paint in a tube in the colour ‘bronze’)
  • Dish sponge (you can choose whatever size/shape you want)
  • Palette (or something that can be used to hold paint)
  • Newspaper
  • Air and outdoor area
Copper/bronze metal utensil holder with coconut shell spoons
Many many spoons


And that’s it from me. It’s a fairly simple pair of hacks, but I am super happy with the results, and hopefully you will be too if you try this out! Hacks don’t need to be complicated or time-consuming. Often, a simple colour change with a cool effect that can be easily achieved, will go a lot further to maximising aesthetic potential, and creating a fun and unique object that you can proudly say YOU upgraded from its original form!

HAPPY PAINTING!

Follow me on instagram for extras and sneak peeks!

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *